THE
EMBER-FYRE™ SYSTEM
The extremely efficient and beautiful fire of the Ember-Fyre burner is an award winning
technology. Popular Science magazine awarded the prestigious "Best of What's
New" award to the Ember-Fyre as one of the years top achievements in science and
technology. This combustion system delivers an efficiency of up to 86.5% and a level of
realism so remarkable that it is difficult to tell apart from our wood burning appliances.
DISTINCTIVE FEATURES
These are the most realistic gas fires available. We simply build the best fire. The
Ember-Fyre burner looks great when turned down to low. You can enjoy the flickering flames
and glowing embers.
 Easy to Operate
The controls, which are concealed behind a lower door are easy to operate and access. All
models feature a push button Piezo ignitor, adjustable heat control, and a varible speed
for the powerful quiet fans.
Quality Construction
The are the BEST built gas appliances money can buy.
Safety First
The firebox pilot assembly utilizes a state-of-the-art thermophile and thermocouple to
monitor the pilot flame and shut off gas flow in 30 seconds or less in the event of a loss
of flame.
The spring loaded retainer and the self-closing pressure relief doors are designed to
dissipate pressure in the firebox should the pilot safety control feature ever foil and a
delayed ignition occur.
Indoor Air Quality
Direct Vent units bring in fresh outdoor air for combustion and vent the burnt
flue gases to the outside. These appliances completely isolate the combustion process from
the air in the home making it perfect for anyone with respiratory problems because of the
superior air quality.
Complete Home Heating
These efficient gas units are rated at up to 86% overall efficiency.
HOW IT WORKS
Natural gas or propane is piped into the SIT gas valve with variable turn-down rate from
43,000 to 16,000 BTU's/hr. The lower pressure gas then flows through a precisely
engineered burner orifice and into a mixing tube where it's mixed with outside air.
The fuel/air mixture is adjusted one time when the appliance is installed, using the
shutter control, which helps to compensate for variations in altitude, fuel type and line
pressure. This gas/air mixture flows through an unique array of burner ports in the
ceramic burner base then ignites and burns. There are no visible tubes or grills to
obstruct the view of the fire. At the Ember-Fyre burner heats to a deep read,
1200*F, it realistically mimics the look of glowing wood embers and charred logs.
Dancing yellow flames further enhance the look and feel of a real wood fire. |
